9V Rechargeable Lithium ion Cylindrical Battery Cell For Test Meter
Quick Details for 9V Rechargeable Lithium ion Cylindrical Battery
Cell For Test Meter
Rechargeable Lithium ion (Li-ion) 9v batteries replace the primary
Lithium ion battery such as CR9V ER9V
The voltage of cylindrical type is 9V. standard size meet for
vearious 9V application
Application:
Remote controller,Electric Scales
Cellular phone
smoke alarm
Power tools
PDA's and handy terminals
Communication devices
Electronic instrument
Specification for 9V Rechargeable Lithium ion Cylindrical Battery
Cell For Test Meter
| No. | Item | General Parameter | Remark | |
| 1 | Rated Capacity | Typical | 220mAh | Standard discharge(0.2C5A) after Standard charge | |
| Minimum | 210mAh | |
| 2 | Nominal Voltage | 7.7V | Mean Operation Voltage | |
| 3 | Voltage at end of Discharge | 6.0V | Discharge Cut-off Voltage | |
| 4 | Charging Voltage | 8.4±0.1V | | |
| 5 | Internal Impedance | ≤300mΩ | Internal resistance measured at AC 1KHZ after 50% charge The measure must uses the new batteries that within one week after
shipment and cycles less than 5 times | |
| 6 | Standard charge | Constant Current 0.2C5A Constant Voltage 8.4V 0.01 C5A cut-off | | |
| 7 | Standard discharge | Constant current 0.2C5A end voltage 6.0V | | |
| 8 | Fast charge | Constant Current 1C5A Constant Voltage 8.4V 0.01 C5A cut-off | |
| 9 | Fast discharge | Constant current 1.5 C5A end voltage 6.0V | |
| 10 | Maximum Continuous Charge Current | 1 C5A | |
| 11 | Maximum Continuous Discharge Current | 1C5A | |
| 12 | Operation Temperature Range | Charge: 0~45℃ | 60±25%R.H. Bare Cell |
| Discharge: -20~60℃ |
| 13 | Storage Temperature Range | Less than 1 year: -20~25℃ | 60±25%R.H. at the shipment state |
| less than 3 months: -20~40℃ |
| Less than 7 day : -20~65℃ |
| 14 | Pack Dimension | L26.5(+0/-2)*W 17.5(+0/-2) *H 48.5(+0/-2)mm | Initial Dimension |
Pictures for 9V Rechargeable Lithium ion Cylindrical Battery Cell
For Test Meter
9V 220mAh Lithium Ion Cylindrical Battery , battery and charger
Packing Method
This model support blistercard packing, and sold in super market
The similar packing photo as below
Production Line for Blistercard Production
Our Advantages:
1). Integrated with R&D, design, manufacture and service for
Lithium-ion battery products.
2). Possessing our own cell, battery pack & BMS patented core
techiniques.
3). Quality: stable quality control, certificated by BIS ISO
4). After-sale service: 1 year warranty for cell. Technical support
from PLB team.
5). Brand building: custom brand label available
