| NO | Project | Qualification | Remarks |
| 2.1 Technical requirements for battery module |
| 2.1.1 | Minimum capacity | Rated capacity*97% | 0.5C/25℃ |
| 2.1.2 | Rated capacity | 100Ah | |
| 2.1.3 | Nominal voltage | 512V | 160 Series |
2.1.4 |
Chassis dimensions | | |
| 2.1.5 |
Chassis material | Q235 | |
| 2.1.6 |
Waterproof grade | IP30 | |
| 2.1.7 |
Charging maximum voltage | 584V | 3.65V/pcs |
| 2.1.8 |
Discharge minimum voltage | 400V | 2.5V/pcs |
| 2.1.9 |
Standard charging current | 0.33C | |
| 2.110 |
Max continuous charging current | 1C |
|
| 2.1.11 |
Standard discharge current | 0.33C | |
| 2.1.12 |
Max continuous discharge current | 1C | |
| 2.1.13 |
Cycle life | ≥3000 cycles |
0.2C charging, discharge/25℃/ 80%DOD |
| 2.1.14 |
Weight | 500KG |
(based on the actual weight of the product) |
| 2.1.15 |
Discharge operating temperature range | -20～+65℃ | Try to avoid the battery being exposed to high temperature (≥35℃)
for a long time. High temperature and low power will easily lead to
accelerated degradation of battery performance. |
| 2.1.16 |
Storage temperature | -20～+50℃ | SOC40～60% |
| 2.1.17 |
Relative humidity | 5～95% |
No condensation, battery system working properly |
| 2.1.18 |
Height | ＜1.6m | |
| 2.1.19 |
Quality guarantee period |
3 years |
3-year free warranty maintenance |
| 2.1.20 |
Shipment with electricity | SOC:20%-60%: | 51V-52.8V |
| 2.1.21 |
communication port. | RS 232*1+CAN*2 | |
| 2.1.22 | Run, alarm LED light display | LED light (green,red) | |
| 2.1.23 | Anti-theft function | Not | |
| 2.1.24 | Communicating protocol | CAN protocol | |
| 2.1.25 | Charging limit current | 20A | |
| 2.1.26 | Reverse protection | Not | |
| 2.1.27 | Dial switch | 6 bit binary | |
| 2.1.29 | Display screen | Yes | |
| 2.1.29 | Dry connect | Not | |
| 2.1.30 | Capacitive load | 30000uF(Max) | |
| 2.1.31 | Heating film | 200W | |
51.2KWH Hight Voltage 512V 100AH LiFePO4 Battery Energy System
Solar Energy Storage Systems
Picture:
5.Operating Instruction
Before using the batteries, carefully read the service manual and
the specification of the batteries.
Please use the batteries in a normal environment, charge
temperature is 0℃~45℃, discharge temperature -20℃~60℃
and the relative humidity is 65%±20%.
During their use, the batteries should be kept away from heat
sources and high voltages, children should not be allowed
to play with them, and they should not be knocked violently.
In no circumstance should the positive and negative poles of the
battery be short circuited. Do not disassemble or
assemble the batteries yourself and do not place the batteries in a
damp place in order to avoid danger.
When the batteries are not to be used for a long time, please store
them safely so that they will stay in a half-charged
state. Please wrap the batteries with non-conductive materials in
order that metallic materials will not contact the
batteries directly, which may result in damage to the batteries.
Keep the batteries in a cool and dry place.
Please dispose of the used batteries properly. Do not throw them in
fire orwater.
If the battery is to be used in other devices, please consult with
the supplier about the degree of perfection of its
protective function, Do not make arbitrary decisions to use battery
in other devices.
6.Cautions
emperature range during charging
The recommended temperature range for battery charging is between
0℃ and 45℃. Charging of the
batteries out of that temperature range will cause the performance
of the batteries to decrease and their
life to shorten.
Consultation
When purchasing the batteries, be careful to remember the way to
stay in contact with the seller so that
you can contact the seller and have consultation with it when
needed.
Warranty period
The manufacturer will not replace the battery free of charge even
in the warranty period if the problem
with the battery results from misuse rather than bad quality.
Safety use guaranteed
If the battery is to be used in other devices, please consult with
the supplier about the degree of
perfection of its protective function. You should at least have a
clear knowledge of such issues as the
heavy current, fast charging and special application of the battery
