Home > Polymer Lithium Ion Batteries >

3.7V Polymer Lithium Battery Pouch LP632035 440mAh For IOT Device

Product Categories

Portable Energy Storage System [59]
Solar Energy Storage System [19]
Battery Energy Storage System [17]
ESS Energy Storage System [36]
Lithium Ion Cylindrical Battery [131]
3.2V LiFePO4 Battery [135]
LiSOCl2 Battery [67]
12V LiFePO4 Battery Pack [121]
Li-Mn Battery [51]
Polymer Lithium Ion Batteries [58]
Electric Bike Battery Pack [51]
Lithium Iron Battery [20]
Portable Battery Chargers [21]
Power Tool Rechargeable Batteries [16]
Ni MH Batteries [36]
Lithium Coin Cell Battery [16]
Battery Electronic Component [14]
Portable Car Jump Starter [63]
E-cig Big Battery [18]

Guang Zhou Sunland New Energy Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

3.7V Polymer Lithium Battery Pouch LP632035 440mAh For IOT Device

Ask Lasest Price
Brand Name :	TAC
Model Number :	LP632035 440MAH 3.7V
Certification :	MSDS REACH ROHS
Price :	usd 3-5
Payment Terms :	L/C, T/T
Supply Ability :	50000 per week
Delivery Time :	15-25 days after order confirm

Add to Cart

Product Details
Company Profile

3.7V Polymer Lithium Battery Pouch LP632035 440mAh For IOT Device

Advantage :

The battery pack with specially ferrite sheet wraps ,the performance including of

A) shielding electromagnetic interference , Safer and healthier

B) Good heat insulation

Specification for 3.7V Polymer Lithium Battery Pouch LP632035 440mAh For IOT Device

No.	Items/項目	Specifications/規格	Remark 備注
1	Nominal Capacity 標稱容量	440mAh	0.2C Standard discharge 0.2C 標准放電
2	Minimum Capacity 最小容量	420mAh	0.2C Standard discharge 0.2C 標准放電
3	Nominal Voltage 標稱電壓	3.7V	Mean Operation Voltage 即工作電壓
4	Delivery volyage 交貨電壓	3.7V-3.95V	Within 10 days from Factory 在出廠 10 天內
4	Charge Voltage 充電電壓	4.2V±0.03V	By standard charge method 標准充電方式
5	Standard charging method 標准充電方式	0.2C constant current,4.2V constant voltage charge to 4.2V,continue charging till current decline to ≤0.01C	0.2C恒流4.2V恒壓充至電流≤0.01C ,時間6.5(供參考)
6	Charge current 充電電流	0.2C	Standard charge, charge time:6.5h(Ref) 標准充電,時間6.5h(供參考)
6	Charge current 充電電流	0.5C	Rapid Charge, charge time:4.5h(Ref) 快速充電,時間3h(供參考)
7	Standard discharging method 標准放電方式	0.2C constant current discharge to 3.0V,	0.2C恒流放電至3.0V
8	Discharge cut-off voltage 放電終止電壓	3.0V	By standard discharge method 標准放電方式
9	Cell Internal Impedance 單電芯內阻	≤150mΩ	Internal resistance measured at AC 1KHZ after 50% charge 半電態下用交流法測量內阻
10	Maximum charge current 最大充電持續電流	0.5C	For continuous charging mod 連續充電模式
11	Maximum discharge current 最大放電持續電流	1C	For continuous discharge mod 連續放電模式

No.

Items/項目

Specifications/規格

Remark

備注

Operation Temperature and relative humidity Range

工作溫度和濕度範圍

Charge/充電

0~45℃

60±25%R.H.

Charge at a very low temperature such as blew 0℃,will be get a lower capacity and reduce cycle life of the battery

低溫充電效率會下降,會影響電池使用壽命

Discharge/放電

-10~60℃

60±25%R.H.

Storage temperature for a long time

長時間儲存溫度

-20~25℃

60±25%R.H.

Do not storage exceed half year. Suggest charge once when storage for half year. Suggest charge the battery which with protect circuit when storage for every 4 month.

不可超過半年,建议達到半年充電一次

帶保護板電池建议3個月充電一次

Battery Photos

Battery Package

Charging and Discharging Room

Product Tags:

LP632035 Polymer Lithium Battery

440mAh Polymer Lithium Battery

IOT Device Polymer Lithium Battery

3.7V Polymer Lithium Battery Pouch LP632035 440mAh For IOT Device

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Guang Zhou Sunland New Energy Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Polymer Lithium Ion Batteries products from this supplier

Find Similar Products By Category:

Electronic Components & Supplies

Hot Searches: